manualshive.com logo in svg

Fiat SEDICI, Owner'S Handbook Manual, Page: 136 / 266

Share
Download
Fiat SEDICI Owner'S Handbook Manual Download Page 136

135

❒

Unhook the strap (

2

) by pushing down

the hook as shown in the illustration.

❒

Hook the strap (

2

) to the front seat

head restraint as shown in the illustra-
tion.

IMPORTANT When securing the folded
rear seat with a strap, adjust the strap
length so that the rear seat will not move.

❒

Fold the entire seat forward.

79J124

(2)

79J125

(2)

63J059

When you unlatch the rear
seat cushion, be careful that

your face or hands are not injured
from the seat popping up.

WARNING

Luggage or other cargo
should be stowed in the lug-

gage compartment with the rear seat
in an upright position, whenever pos-
sible. If you need to carry cargo in the
passenger compartment with the rear
seat back folded forward, be sure to
secure the cargo or it may be thrown
about, causing injury. Never pile car-
go higher than the seatbacks.

WARNING

129-148 Fiat16 New GB  3-09-2008  10:35  Pagina 135

Summary of Contents for SEDICI











































































































































































































































































Reviews:

No comments