manualshive.com logo in svg

Fiat SEDICI, Owner'S Handbook Manual, Page: 102 / 266

Share
Download
Fiat SEDICI Owner'S Handbook Manual Download Page 102

101

Heat (c)

Temperature-controlled air comes out of
the floor outlets and the side outlets, al-
so comes out of the windshield defroster
outlets and the side defroster outlets
slightly.

Defrost (e)

Temperature-controlled air comes out of
the windshield defroster outlets, the side
defroster outlets and the side outlets.

Ventilation (a)

Temperature-controlled air comes out of
the center and side air outlets.

79J065

79J066

Bi- level (b)

Temperature-controlled air comes out of
the floor outlets and cooler air comes out
of the center and side outlets. When the
temperature selector (

1

) is in the fully

COLD position or fully HOT position,
however, the air from the floor outlets
and the air from the center and side out-
lets will be the same temperature.

79J067

79J068

Heat & defrost (d)

Temperature-controlled air comes out of
the floor outlets, the windshield defroster
outlets, the side defroster outlets and the
side outlets.

79J069

(g)

(f)

63J047

Air intake selector (4)

This selector is used to select the follow-
ing modes.

Fresh Air (f)

When this mode is selected, the indica-
tor light will go off and outside air is
used.

069-128 Fiat16 New GB  3-09-2008  11:58  Pagina 101

Summary of Contents for SEDICI











































































































































































































































































Reviews:

No comments