4
Compressed air reservoir
•
Install a compressed air reservoir (e.g. type VZS-...-
B) between the service unit and the proportional di-
rectional control valve, if the behaviour of the cylinder
does not meet your requirements and if you ascer-
tain fluctuations in pressure of over 1 bar at the
measuring point during operation.
In this way you can reduce fluctuations in pressure dur-
ing operation. You can compensate for slight excesses
in the permitted pressure by using supply tubing with a
larger cross section.
Reservoir volume:
The size of the reservoir volume depends on the cylin-
der volume of the drive used and should be at least
twice as large as the volume of the cylinder used.
V
P
= 2 * V
Z
V
P
= buffer volume
V
Z
= cylinder volume (V
Z
= r
2
*
π
* L
Z
)
L
Z
= cylinder stroke length
3. Installation
SPC-10 9902a
3-9
Summary of Contents for SPC-10 Series
