Festo Smart cubic CPA-SC Series, Manual

Page: 45 / 136

2. Fitting
2−5
Festo P.BE−CPASC−EN en 0412b
2.2 Fitting variants
The CPA−SC valve terminal has been prepared for fitting into a
system or machine in one of the following ways:
Type of fitting Description
Fitting onto a
hatrail The CPA−SC valve terminal is suitable for
fitting onto a hat rail (support rail as per
EN50022).
Before the CPA−SC valve terminal can be
fitted onto a hat rail, a mounting kit must be
fitted onto the rear of the valve terminal so
that it can be hung on the hat rail.
Note the specifications on vibration and
shock for CPA−SC valve terminals with field
bus direct (see appendix A Technical data").
Fitting onto a wall Use this type of mounting if you wish to fit
the CPA−SC valve terminal onto a machine.
The base block of the CPA−SC valve terminal
has 4 holes for fitting ont onto a wall (see
Tab.2/2).
Tab.2/1: Methods of fitting the CPA−SC valve terminal
Please note
Mount the CPA−SC valve terminal so that there is sufficient
space for heat dissipation and so that the maximum limits
for temperatures are observed (see Technical data").