Festo Smart cubic CPA-SC Series, Manual

Page: 67 / 136

3. Installation
3−15
Festo P.BE−CPASC−EN en 0412b
Laying the tubing
Please note
·
If necessary, place a suitable sealing ring under the
M5/M7 screw connectors or silencers, in order to avoid
leakage.
If angled connectors or multiple distributors are used, the air
flow will usually be reduced.
Connecting Proceed as follows:
1. Push the tubing as far as possible in or over the tubing
connection of the screw connector.
2. If necessary, pull locking ring
1
over the tubing connec
tion or tighten the clamping screw
2
.
3. For reasons of clarity bundle the tubing together with:
tubing straps or
multiple hose holders.
1
2
Fig.3/4: Fitting the tubing
Position of the pneumatic connections
The position of the pneumatic connections depends on the
variant of the CPA−SC (see following figures).