Festo Smart cubic CPA-SC Series, Manual

Page: 104 / 136

5. Maintenance and conversion
5−6
Festo P.BE−CPASC−EN en 0412b
5.3 Replacing CPA−SC components
Components on sub−bases can easily be replaced for
maintenance and conversion work.
The following components are available:
valve plates with one valve solenoid coil
(Ident. code: M and X)
valve plates with two valve solenoid coils
(Ident. code: B, E, G, I, J, K and N).
Blanking plate
Please note
Valve locations on the CPA−SC series are suitable for con
trolling either 1 or 2 valve solenoid coils.
Check how many valve solenoid coils the relevant valve
location supports:
If you wish to replace a blanking plate with a valve plate
with two valve solenoid coils.
If you wish to replace a valve plate with one valve sole
noid coil with a valve plate with two valve solenoid coils.
CPA−SC valve terminal with MP, FL or DI connection
The number of valve solenoid coils which can be controlled on
one valve location depends with this connection variant on
the total number of valve locations.
CPA−SC valve terminal with MP or FL connection:
Instructions on addressing can be found in the Brief descrip
tion" P.BE−K−CPASC.
CPA−SC valve terminal with DI connection:
Instructions on addressing can be found in the Electronics
manual" P.BE−CPASC−CPVSC−DN−....