Festo Smart cubic CPA-SC Series, Manual

Page: 103 / 136

5. Maintenance and conversion
5−5
Festo P.BE−CPASC−EN en 0412b
CPA valve terminal
connection variant Proceed as follows
PI connection
·
Mark the appropriate plug−in plug for
each valve plate.
·
Dismantle all valve plates (see section
Loosening components").
·
Then push the plug−in plugs out of the
guide in the base block.
HC connection
·
Mark all connecting plugs on the valve
plates.
·
Press on the locking lugs of the connect
ing plugs.
·
Pull the plugs carefully away from the
HCconnections.
Tab.5/1: Loosening the electrical connections
Loosening the pneumatic connections
Loosening the pneumatic connections is described in
chapter 3.
Dismantling the CPA valve terminal
Dismantle the CPA−SC valve terminal as described in
chapter 2.