Festo Smart cubic CPA-SC Series, Manual

Page: 110 / 136

5. Maintenance and conversion
5−12
Festo P.BE−CPASC−EN en 0412b
2. Place the separator element (in Fig.5/4, position
1
) on
the hexagon socket screw.
3. Align the recess in the separator element (in Fig.5/4,
position
2
) flush with the fixing pin.
4. Push the separator element on the right−hand side of the
base block into the apprpriate channel 1, 3 or 5 until it
touches the fixing pin (see Fig.5/4).
1
Recesses in the
separator element
2
Separator
elements
1
2
Fig.5/4: Fitting pressure zone separator elements
5. Pull the fixing pin by the projecting dismantling aid out of
the hole (in the example in VP 4).
6. Insert the fixing pin into the hole of the appropriate chan
nel on the next valve location. The relevant holes are
marked in black in example (Fig.5/3) in VP5.
7. Tighten the separator element with 0.8 Nm + 20 %.
8. Cover the valve location or fit equipment into it.
Protect an unused valve location with a blanking plate
and the electrical contacts with the cover foil supplied
with the set.