Festo Smart cubic CPA-SC Series, Manual

Page: 107 / 136

5. Maintenance and conversion
5−9
Festo P.BE−CPASC−EN en 0412b
5. Screw the component at first slightly and then tighten it
with 0.3 Nm.
You must carry out the following task before a valve plate can
be fitted onto a CPA−SC valve terminal with HC connection:
1. Carefully insert the HC connecting plug into the HC con
nection on the relevant valve plate.
5.3.2 Fitting/dismantling the pressure zone separator element
The CPA−SC valve terminal can be operated with maximum
2pressure zones. The pressure zones are formed by separ
ator elements which can be inserted in the following chan
nels:
Supply channel 1
Exhaust channels 3 and 5
For forming two pressure zones you will require a channel
separator set type CPASCI−KT... for each channel (1, 3, 5)
which you wish to separate. The set consists of the following
components (see Fig.5/2).