Festo Smart cubic CPA-SC Series, Manual

Page: 108 / 136

5. Maintenance and conversion
5−10
Festo P.BE−CPASC−EN en 0412b
1 2
3
4
5
1
Blanking plate with screws and seal
2
Cover foil for electric contacts
3
Identification plate
4
Complete separator element:
Sleeves, O−ring and separator element
with recess for fixing pins
5
Fixing pins:
With a notch for channel 1, with 3
notches for channel 3, with 5 notches
for channel 5
Fig.5/2: Components of the channel separator set
Please note
In the fitting procedure described below, the position of
the valve terminal is taken as the basis Fig.5/3. In the
example a channel is separated between valve locations 5
(VP 5) and 6 (VP 6). For this fitting you can also use the
Festo socket head screw wrench (SW 4), type:
CPASC1−MWKT.