Festo Smart cubic CPA-SC Series, Manual

Page: 7 / 136

Contents and general instructions
V
Festo P.BE−CPASC−EN en 0412b
Designated use
The CPA−SC valve terminals or CPA−SC individual location
base blocks described in this manual are intended for fitting
into a machine or automated system. It is absolutely necess
ary to observe the safety instructions in this manual as well
as the designated use of the relevant CPA−SC valve terminal
or CPA−SC individual location base block. The CPA−SC valve
terminals or CPA−SC individual location base blocks may only
be used as follows:
as intended in industrial installations.
in orignal condition without any modifications by the user
Only the conversions or modifications described in the
documentation supplied with the product are permitted.
in faultless technical condition.
When used together with commercially available compo
nents, such as actuators, the specified limits for pressures,
temperatures, electrical data, torques etc. must be observed.
National and local safety regulations must also be observed.
Target group
This manual is intended exclusively for technicians trained in
control and automation technology who have experience in
fitting, installing, commissioning, servicing and converting
pneumatic components.
Service
Please consult your local Festo repair service if you have any
technical problems.