Ferrari California, Workshop Manual

Page: 1409 / 1727

Total dry film build: 15 - 20 µm
Dry to sand at 20°C 30 - 45 minutes (D832)
Dry to sand at 35°C 30 - 45 minutes (D833)
Repair / Recoating: with P400 (dry), if necessary
Overcoat / Re-coat time at
at 20°C (airdrying): 30 – 40 minutes
Deltron D821 – 2K HS Chip Resistant Primer [Primer Surfacer]
D104 / For detailed information see technical datasheet "104 – Deltron D821"
For detailed information see chapter / section “Sanding and Cleaning”
Hardener and thinner selection: for detailed information see chapter / section “Hardeners and
Thinners”
Mixing Ratio
Untinted
D821 5 vol D821 3 vol
HS-Hardener 1 vol MS-Hardener 1 vol
Thinner 1 vol Thinner 1 vol
Tinted
D821 3 vol D821 3 vol
DG 1 vol DG 1 vol
HS-Hardener 1 vol MS-Hardener 1,5 vol
Thinner 1 vol Thinner 1 vol
Number of coats: 2-3
Flash-off between coats at 20°C: 10 – 15 minutes
Flash-off before stoving at 20°C: 10 – 15 minutes
Drying times:
Total dry film build: 70 – 110 µm (tinted: 60 – 90 µm)
Dustfree at 20°C 35 minutes
Touch dry at 20°C 1,5 - 2 hours (tinted: 2 – 2.5 hours)
Through dry at 20°C Overnight
Through dry at 60°C
20 – 25 minutes; tinted: 30
minutes (metal temperature)
Through dry (IR)
10 - 15 min
Sand with P400 (dry) or P800 (wet)
Approved Topcoats to be used with this Repair System
Deltron BC see technical datasheet "02 – Deltron BC"