Ferrari California, Workshop Manual

Page: 1620 / 1727

NEVER modify any of the individual
components of the system.
NEVER cut or tamper with the connectors
between the wiring harness and the
airbag modules.
Any inappropriate work carried out on the
components of the system may cause
airbag system malfunctions, involuntary
airbag activation or failure to deploy in the
event of an accident, leading to damage
and possibly fatal injury.
Undo the four screws (1) fastening the mounting
bracket (A) for the passenger side airbag
module (B) .
Undo the four nuts (2) fastening the passenger
side airbag module (B) to the upper
dashboard trim panel.
Remove the passenger side airbag module (B)
from the upper dashboard trim panel and
replace.
Fit the new passenger side airbag module (B)
onto the upper dashboard trim panel.
Tighten the four nuts (2) fastening the passenger
side airbag module (B) to the upper
dashboard trim panel.
Tightening torque Nm Class
Nut 7.5 Nm B
Tighten the four screws (1) fastening the
mounting bracket (A) for the passenger side
airbag module (B) .
Tightening torque Nm Class
Screw 5 Nm B
Refit the upper dashboard trim panel ( E4.02 ).
Perform the airbag ECU Cycle with the DEIS tester.
Replacing the side airbag modules
Fastening side airbag - mounting bracket Screw 8.5 Nm B
Fastening side airbag mounting bracket - door
panel
Screw 8.5 Nm B
Tightening torque Nm Class