46
Edgebander with glue pot
G 200 / G 220
12 Wiring diagram
Attention! The electrical diagrams supplied are only for the use of qualified electricians or authorized techni-
cal personnel of manufacturer. These diagrams do not authorize you in any way to change the electricalparts
or logic functioning.
11 Faults
11.1 Safety instructions
Warning! Risk of injury: Repairing faults incorrectly can result in personal injury or damage the machine. For
this reason this work may only be carried out by authorised, trained personnel who are familiar with the ope-
ration of the machine and in strict observance of all safety instructions.
Warning! Danger – electric current: Work on electrical fittings may only be carried out by qualified personnel
and in strict observance of the safety instructions.
11.2 What to do if a fault develops
Stricktly speaking:
•
In the event of a breakdown which creates danger
for either personnel or equipment the machine should
be stopped immediately, by activating the emergency
stop.
•
Also disconnect machine from the mains and secure
it from being switched on again.
•
Inform those responsible for machine faults immedia-
tely.
•
Type and extent of fault should be determined by an
authorised professional, as well as the cause and
repair.
11.3 What to do after rectifying the fault
Before switching the machine back on:
• the fault and its cause are professionally repaired,
• all safety equipment has been replaced and is wor-
king correctly,
• people are not located in the danger area of the
machine.
Warning! Risk of injury!
Faults
Summary of Contents for G 200
Page 47: ......
