Felder G 200, Operating Manual

Page: 18 / 48

18
G 220
!
Edgebander with glue pot
G 200 / G 220
Transport, packaging and storage
6.1 Safety instructions
Warning! Risk of injury: There is a risk of injury due to falling parts while transporting, loading or unloading
the machine.
Attention! Risk of material damage: The machine can be damaged or destroyed if it is subjected to improper
handling during transport.
For this reason the following safety instructions must be
observed:
• Never lift loads over a person.
• Always move the machine with utmost care and pre-
caution.
• Only use suitable lifting accessories and hoisting
devices that have a sufficient load-carrying capacity.
• The machine should never be lifted using protruding
parts (e.g. fences, sliding table etc.).
• Consider the machine‘s centre of gravity when trans-
porting it (minimise the risk of it tipping over).
• Take measures to prevent the machine from slipping
sideways.
• Ropes, strops or other hoisting devices must be equip-
ped with safety hooks.
6.2 Transport
6 Transport, packaging and storage
• Do not use torn or worn ropes.
• Do not use knotted ropes or strops.
• Ensure that ropes and belts do not lie against sharp
edges.
• Transport the machine as carefully as possible in or-
der to prevent damage.
• Avoid subjecting the machine to shocks.
• When transporting the machine overseas, ensure that
the packaging is air-tight and that a desiccant is ad-
ded to protect the metal parts against corrosion.
Unless otherwise agreed, the machine is delivered parti-
ally dismantled on a pallet.
The machine can be transported with a crane, forklift,
pallet jack or rolling carriage.
When moving the machine with a forklift or pallet jack,
bolt the transportation device (option) onto the housing.
Fig. 8: Unloading
Attention: Transport the machine only according to the enclosed transport and assembly instructions.
Do not lift the machine by its work table, extension frames or handwheels. Ropes, belts and chains may only
be fastened to the base.