29
!
!
"
Edgebander with glue pot
G 200 / G 220
!
Workpiece
"
Sliding panel
You can infeed a second workpiece when the first work-
piece has passed the arrow.
If you disregard then the front tape shear doesn´t work
for this operation.
!
Sticker
8.8.3 Processing of thin workpieces
Fig. 21: Processing of thin workpieces
If the workpiece to be machined is narrower than the
drive belt (smaller then width of 72 mm) you must edge
tape the workpiece together with a wooden plate of the
same type and thickness.
8.8.4 Infeed of two workpieces
Fig. 22: Infeed of two workpieces
Making adjustments and preparations
Summary of Contents for G 200
Page 47: ......
