42
2,5-3 cm
4 Kg.
!
!
!
!
Edgebander with glue pot
G 200 / G 220
!
Screws
The belt tension is tensioned factory made. In case
further adjustment is necessary, (e.g.: when changing the
belt) turn screws and do the same adjustment on both
sides. Carry out tension adjustment with belt feeder in
operation.
If the belt tension is not correct, this can create a panel
feeding problem but also damage the rubber motorized
roller.
Ensure that the belt tension is still correct after the first 20-
25 operating hours.
!
Screws
Maintenance
10.3.4 Adjustable rollers on the table
Fig. 34: Exchanging tools
10.3.5 Adjusting the belt tension
This model is equipped with small adjustable rollers
on the table, besides making more efficient the panel
feeding it also assure side pressure.
To adjust the side pressure slacken the screws, move the
roller with the right tilt. Tighten the screws.
Repeat the operation to the rollers. The rubber rollers
are rectified with a very high precision and the bushings
assuring a regular feeding and straight line of the panel.
Fig. 35: Belt tension
Fig. 36: Belt tension
Summary of Contents for G 200
Page 47: ......
