![background image](http://html1.mh-extra.com/html/feig-electronic/id-isc-ant-u500-270-dm/id-isc-ant-u500-270-dm_manual_3899834073.webp)
UHF-Reader
Manual
ID ISC.ANT.U500/270 - DM
FEIG ELECTRONIC GmbH
Page 73 of 117
H71011-0e-ID-B.docx
MODE = 0x00 (RFC Controller Firmware)
Host
Reader
Byte
1
2
3
4
5
6
7...8
9
Contents
STX
(0x02)
MSB
ALENGTH
LSB
ALENGTH
COM-
ADR
[0x66]
STATUS
10
SW-REV
D-REV
10
11
12 .. 13
14 .. 15
16 .. 17
18 .. 19
HW-TYPE
SW-TYPE
TR-TYPE
RX-BUF
TX-BUF
CRC16
SW-REV:
Revision status of the Firmware. Depending on the Mode and Reader type differ-
ent controllers are meant.
D-REV:
Revision status of the development Firmware. D-
REV is set to ‘0’ in customized
Firmware revisions.
HW-TYPE:
Displays information about the Hardware Version
SW-TYPE:
Type of RFC Reader Firmware
0x83
ID ISC.ANT.U500/270-DM
(131)
TR-TYPE:
Displays the Transponders supported by the RFC software.
RX-BUF:
RX-BUF is the maximum receive buffer size of the Reader. If a protocol from the
host exceeds the RX-BUF size the Reader responds with 0x81 PROTOCOL
LENGTH ERROR.
TX-BUF:
TX-BUF is the maximum transmit buffer size of the Reader. The Host has to take
in to account that a response protocol of the Reader can have this length.
10