UHF-Reader
Manual
ID ISC.ANT.U500/270 - DM
FEIG ELECTRONIC GmbH
Page 22 of 117
H71011-0e-ID-B.docx
Structure of configuration parameter description.
Byte
0
1
2
......n
contents
RAM-eff.
EEPROM-
eff.
00
res
.....
not marked
Changing of this parame-
ter becomes immediately
effective after writing /
saving this configuration
block to RAM
marked with “00“
these bits or bytes are reserved for
future extensions or for internal
testing
and
manufacturing-
functions. These bits or bytes and
also any not described bits and
bytes
must not be changed
, as
this may cause faulty operation of
the Reader.
gray marked
Changing of this parame-
ter only becomes effective
after writing / saving this
configuration
block
to
EEPROM and a reset of
the RF Controller with 9.2.
[0x64] System Reset in
mode 0x00.
