UHF-Reader
Manual
ID ISC.ANT.U500/270 - DM
FEIG ELECTRONIC GmbH
Page 72 of 117
H71011-0e-ID-B.docx
9.3. [0x66] Get Reader Info
This protocol allows you to determine the currently installed Firmware version, its type and the
types of the Transponders which are supported by the Firmware as well as some other hard- and
firmware options of the Reader. Also the Device-ID can be determined.
Host
Reader
Byte
1
2
3
4
5
6
7 .. 8
Contents
STX
(0x02)
MSB
ALENGTH
LSB
ALENGTH
COM-ADR
[0x66]
MODE
CRC16
MODE:
Via the Parameter MODE different information can be requested from the Reader.
0x00:
RF-Controller Firmware
0x03:
RF-Decoder Firmware
0x04:
Firmware Identifier
0x05:
Bootloader Firmware
0x10:
Hardware Information
0x15:
RF-Stack Information
0x16:
IDT-Stack Information
0x40:
CFG-Information for read
0x41:
CFG-Information for write
0x50:
LAN-Information: MAC
0x51:
LAN-Information: IP-Address
0x52:
LAN-Information: Netmask
0x53:
LAN-Information: Gateway-Address
0x60: I/O Capabilities
0x61:
Peripheral Devices
0x80:
Device-ID (Information is required for Firmware upgrades)
0xFF:
All (reads all available information at once)
Depending on the MODE Parameter the Reader response has a different structure including dif-
ferent information:
