FBII XL-4, Programming Manual

Page: 5 / 100

1–1
S E C T I O N 1
Introduction
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
The control panel can be completely programmable through the LCD keypad. The panel is
shipped from the factory with preprogrammed default characteristics, which will suit many
typical installations. These default values are displayed in the section of this manual titled
System Defaults.
Installer programming through a LCD keypad can be used to setup the panel during the
initial installation or to modify programmable values at a later date. In addition, the control
panel can be programmed through the EZ-MATE PC Based Downloader.
System keypad programming is accomplished through a series of questions presented on the
LCD keypad display. These displays contain easy to understand, simple English language
prompts. The programming questions are described in detail in the LCD Keypad
Programming Questions section of this manual.
Keypad programming is reserved for installer use only and is secured by the installer code.
Functions such as user code modification can be performed through keypad entry without the
need to enter the keypad programming mode.
This manual covers the models XL-4, XL-4B, and XL-5 control panels. The XL-4 is a
Household Burglary and Fire system, the XL-4B is the Commercial Burglary system, and the
XL-5 is a larger Burglary and Fire system.
Keypad programming can only be performed while the system is in a disarmed state.
UL
Failure to program the control panel as described for UL Listed applications, is a violation of the
Listing Mark of Underwriters Laboratories.