FBII XL-4, Programming Manual

Page: 19 / 100

6–1
S E C T I O N 6
Question Selection Modes
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
In This Section
♦
General
♦
Sequential Method
♦
Direct Method
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
General
The keypad programming questions can be obtained either sequentially or directly as
described in the following paragraphs.
In order to use either question selection method you must already be in the Installer Keypad
Programming mode.
Sequential Method
A fast method to scroll through the sequence of programming questions involves the
successive use of the NEXT QUESTION (or STAY) key. This will advance forward through
the programming questions in sequential order without changing any of the current values.
The questions presented will depend on the Installer Programming level and the values in
previous questions.
FORMAT:
NEXT Q. NEXT Q. NEXT Q
Direct Method
Using the direct method any specific programming question can be obtained through the
question sequence number. This method provides instant access to any programming
question through the three-digit sequence number. A master listing containing all the
programming questions can be found later in this manual.
FORMAT:
SHIFT NEXT QUESTION NNN
where:
SHIFT NEXT QUESTION is the depression of the SHIFT [
✴
] key followed by NEXT
QUESTION [STAY] function key.
NNN is the three-digit sequence number of the question desired.
The system must already be in the Programming mode.