FBII XL-4, Programming Manual

Page: 48 / 100

XL-4, XL-4B, and XL-5 LCD Keypad Programming Manual Version 4
8–26
Enable Keypad Zone Directory
057 ZONE DIR
YES
The system has a user initiated keypad function (LCD keypads only) which can scroll
through the zone descriptions for all zones assigned to the partition ( # 4 ). This question
enables or disables the keypad directory function. Press the 0 key to toggle between the
available choices.
Enable Quick Bypass Arming
058 QUICK BYPASS
YES
Indicates whether the quick bypass command [ # 5 ] will be available to users of the system.
NOTE: If quick bypass is enabled then it will be available throughout all partitions of a
multi-partitioned system.
UL
In UL Listed systems this option must be "NO".
Press the 0 key to toggle between the available choices.
Enable Chime Control
058 CHME CNTRL
YES
Indicates whether the keypad option to turn the system chime on and off [ # 6 ] will be
available to users of the system.
If chime control is enabled then it will be available throughout all partitions of a multi-partitioned
system.
Each zone has an individual option to select whether the zone can activate the chime
(question 169). Press the 0 key to toggle between the available choices.
Super User Enable
060 SUPER USER
YES
Selects whether user authorization level 1 will be able to alter user partition assignments
within all partitions of the system. Press the 0 key to toggle between the available choices.
Multi-Partition Operation
061 MULTI PART
ARM/DISARM
Selects the functions that are available through the multi-partition operation command
[# 0 ]. The multi-partition option allows an authorized user to turn any keypad into an active
keypad for any selected partition, or to group arm or disarm the system. Press the 0 key to
toggle through the following multi-partition functions:
ARM/DISARM Allows multiple partition arming and disarming by authorized users.
DISABLED Multi partition function [ # 0 ] is not permitted.