Com.X Administrator Guide
Page 203
6.18 Flash operator panel
6.18.1 Flash Operator Panel demo version
Com.X units featuring 1.2 software include a demo version of the Flash operator
panel version 2 (FOP2), which shows graphically and dynamically the status of
extensions, trunks and advanced features.
From the operator panel, calls can be answered, transferred, originated, recorded
and ended, using simple clicks of a mouse.
The demo version of the Flash operator panel included as stock on Com.X products
allows for up to 15 extensions, trunks, queues or parking lots. By default, the panel
will show buttons for the first 15 such mechanisms configured, but not for any
configured thereafter. Should the full version of the Flash operator panel be required,
licenses can be purchased through Far South Networks.
6.18.2 FOP2 access
By default, full access to the Flash operator panel is granted to only the user of the
operator extension. This extension has access to the full suite of features on the flash
operator panel, regular users have access to a limited operator panel, containing only
some of the complete functionality.
Note: If no operator extension is configured, then the extension with the lowest
numerical DID will be assigned as the default operator extension for FOP2 access.
6.18.3 Setting the operator extension
The operator extension of the system is configured on the Com.X GUI, from
“General Settings” page, found in the “advanced” menu. The operator extension will
be permitted full access to the operator panel, whilst other extensions have limited, or
no access.
Figure 116: An Operator extension can be manually configured.
6.18.4 Limiting Flash Operator Panel access to operator only
On the “General Settings” list on the “Setup” page of the GUI, the flash operator
panel can be configured to allow (limited) access to users of all extensions, and full
access to the operator user or to allow access only to the operator extension. Setting
the “FOP only available to Operator” field to “true” will bar any other extensions from
accessing the flash operator panel at all, whilst setting this field to “false” will allow
full access to the operator user, and limited access to all other extensions. Select the
desired setting and then “Review/Apply” to activate the changes.
©2010 –
2016
Far South Networks