manualshive.com logo in svg

Far south networks Com.X, Administrator'S Manual

The Far South Networks Com.X "Administrator's Manual" is an essential resource for efficiently managing the product's functions. Easily downloadable for free from manualshive.com, this comprehensive manual provides step-by-step instructions and valuable insights to ensure a seamless user experience.

Share
Download
background image

Com.X Administrator Guide

Page 146

4.3 Conferences

This feature allows multiple users to join a conference with two-way audio on all 
devices. Conference features include join and leave announcements, passwords, 
conference administration, in-conference menus, etc.

Field

Content

Conference number

The number to dial to access the conference

Conference name

A custom name for this conference

User PIN

A pin required to be entered by users in order to join the 
conference. This field is optional. The user must press # after
entering the pin.

Admin PIN

A pin that identifies the conference leader (admin). This field 
is optional, unless “Leader wait” has been enabled. The user 
must press # after entering the pin.

Join message

If set, this audio recording will be played before a user joins 
the conference.

Leader wait

If enabled, the conference will not start until the leader has 
joined by entering the Admin pin.

Quiet mode

When enabled, audio recordings associated with joining and 
leaving the conference will not be played.

User count

If enabled, the number of users already in the conference will
be announced to a new user joining the conference.

User join/leave

If enabled, an announcement will be made when-ever a user 
joins or leaves the conference.

Music on hold

If enabled, music will be played when there is only one user 
in the conference.

Allow menu

When enabled, users and the admin user can access their 
menus by pressing *

Record conference

If enabled, conferences using this conference number will be 
recorded.

Table 28: Conference configuration

©2010 – 

2016

 Far South Networks

Summary of Contents for Com.X




















































































































































































































Reviews:

No comments

Related manuals for Com.X

TRENDnet TPE-105i Quick Installation Manual preview
TPE-105i
Brand: TRENDnet Pages: 4
BEANAIR WILOW-IOT-GATEWAY-4G Quick Start Manual preview
WILOW-IOT-GATEWAY-4G
Brand: BEANAIR Pages: 29
D2D FLEX 3000 Setup Manual preview
FLEX 3000
Brand: D2D Pages: 37
hilscher NIOT-E-TPI51-EN-RE User Manual preview
NIOT-E-TPI51-EN-RE
Brand: hilscher Pages: 258
MatchX Box EU MX1701 User Manual preview
Box EU MX1701
Brand: MatchX Pages: 20
ZyXEL Communications ZyXEL ZyWALL 10W Specifications preview
ZyXEL ZyWALL 10W
Brand: ZyXEL Communications Pages: 2
Grandstream Networks GXW4248 User Manual preview
GXW4248
Brand: Grandstream Networks Pages: 54
Kunbus PR100088 User Manual preview
PR100088
Brand: Kunbus Pages: 30
Ubee DVW32CB Installation Manual preview
DVW32CB
Brand: Ubee Pages: 7
ABB 83342 Operating Instructions Manual preview
83342
Brand: ABB Pages: 20
MikroTik 4752224007131 Quick Manual preview
4752224007131
Brand: MikroTik Pages: 22
Plugwise Adam Installation Manual preview
Adam
Brand: Plugwise Pages: 28
L&S SMART GATEWAY Technical Data Manual preview
SMART GATEWAY
Brand: L&S Pages: 28
Efento Gateway User Manual preview
Gateway
Brand: Efento Pages: 14
ADTRAN SMART/RG SR555ac User Manual preview
SMART/RG SR555ac
Brand: ADTRAN Pages: 154
Promise Technology VTrak G1000 Product Manual preview
VTrak G1000
Brand: Promise Technology Pages: 58
SmartRG SR616ac Quick Start Manual preview
SR616ac
Brand: SmartRG Pages: 16
Telstra bigpond velocity User Manual preview
bigpond velocity
Brand: Telstra Pages: 13

Brands by name

Popular brands

Load more brands