Com.X Administrator Guide
Page 55
the button below, and may be supplied separately (e.g.
ca.crt, client.crt, client.key) or in a PKCS12 package (e.g.
client.p12)
CA/Certificate/key/PK
CS12
Click on the “...” button to upload certificates from your local
file system to your client device.
3.2.6 Adding IP Routes to Interfaces
When an interface is configured with an IP address, an ip route matching that
address and the configured subnet of the interface is autoimatically configured,
associating the port with traffic on the subnet.
Additional routes can be added to an interface, ensuring all traffic to the associated
address(es) is directed through the interface.
Routes can be configured for individual addresses as well as for a range of IP
address, by declaring the subnet range after a '/'.
To configure an IP route, select the desired interface and select the Routes tab and
then the add button.
Figure 43: Adding a route to all addresses in the 10.0.0.X range
by declaring the subnet, /24
Click Accept and then review and apply your changes.
Note: After applying network configuration changes, the unit needs to be rebooted
or the networking service restarted.
3.2.6.1 Removing IP Routes from an Interface
Configured routes can be removed from interfaces by selecting the routes tab of the
associated interface, selecting the route, and then clicking the Remove button.
Accept and apply your changes.
©2010 –
2016
Far South Networks
