Instruction Manual for the Delivery Table FREYA 3
Page 12
-
remove the equipment from the package,
-
remove the caster locking elements,
-
release the central caster locking device,
-
with the help of another person, slowly and carefully remove the table off the pallet, subsequently
– lock the casters,
NOTE!
While rolling the table, do not hold the plastic covers of the base nor lying surface
frame, because it may damage the covers.
-
verify the equipment completeness acc. to the attached documentation,
-
place the device in the target location, which meets the requirements specified in this instruction
manual (pt. 1.2 General requirements, 1.8 Electromagnetic compatibility),
-
check whether the central caster locking device works,
-
connect it to the mains,
NOTE!
First, connect the power cord to the delivery table, subsequently – to the mains.
-
check whether the electronic table control system works, performing all the functional table
movements by use of all the available control elements: foot controller and side panels.
Furthermore, check whether the locking devices of the functional movements work, using the
central control panel. Check whether the mechanical system for the Trendelenburg angle
adjustment works. All the activities to be performed acc. to the description in pt. 3 Operation.
During all the verification activities described in this subpoint, the table mechanisms should work
quietly and smoothly, without jamming, squeaking, etc. Bed mechanisms and electric servo-motors
produce noise which does not exceed 65dB(A) at the distance of 1 m from the bed
NOTE!
Assuming that the device is not entirely functional, that is when the achieved
parameters diverge from the description contained herein, do not operate it.
Consult with the manufacturer/supplier (dealer). Using the defective device may
lead to damage, sustained by the user, for which the manufacturer assumes no
liability.