FAMC Liquid Tracks, User Manual

Page: 19 / 58

19
PRESET MODE
Upon power up, the Liquid Tracks will load the currently installed media card data and place you into its normal
operating mode, PRESET MODE. At any one point in time, only one BANK is active. Within preset mode, you have the
ability to select between preset #000 and #127. To switch between banks, press
[HOLD LEFT] . Switching banks will
keep the preset number intact, so it’s a way to A/B your presets should you chose to mirror BankA with BankB.
Rotate the dial to manually change presets and scroll through your list. If you stop scrolling and do nothing for 1/2
second, the unit will go back to the last preset used or selected. To select a preset and start it (or trigger), simply scroll
to the preset and press the
[SELECT] button. This will arm and trigger the preset. You can manually trigger a preset
that is not set to immediate start by pressing any button. Typically at this point you would have an outside midi device
(like the Liquid-­‐Foot Pro midi foot controller) send a message to trigger a preset (see MIDI implementation at the end
of this user guide).
Within preset mode, various icons on the display represent the state and status of the currently selected preset. Below
is an example of a preset with many options activated:
Preset #
Preset Name
Title
Artist
Start Trigger
Programmed
End Trigger
Programmed
Midi File
Attached
Audio File
Attached
Play Status:
Play
Pause
Stop
Trigger Wait
Audio Play Time Active Bank