FAMC Liquid Tracks, User Manual

Page: 14 / 58

14
The User Interface
Buttons
There are 5 buttons and a rotary dial for you to control and roam the entire
system. The
[UP] and [DOWN] buttons typically allow you to jump from one
parameter to another within the menu system. Pressing and holding the [UP]
key has two functions, (1) if you are in preset mode, holding the [UP] button will
take you into the Main Menu system.
When you have the ability to “scroll” through items (like presets, or menu
options), you will typically rotate the dial in a Clockwise or Counter Clockwise
direction as you would expect. Rotating the dial by itself may change a value,
preset, setting, or menu item, but seldom will do anything other then modify the
setting. An action will need to be taken, which usually entails pressing the
[SELECT] button to indicate acceptance.
Selecting items, saving changes, or accepting some prompt for your input is usually accomplished by pressing the
[SELECT] key. Keep in mind that pressing and holding the [SELECT] button for two seconds will shut the unit off. If you
are in the menu system and press [SELECT] to save a parameter that you entered or modified, you will see the status
light blink quickly to indicate the save took place. While most menu parameters will not automatically advance upon
pressing
[SELECT] , you will be clear to go [UP] or [DOWN] with your changes saved.
The [LEFT] and [RIGHT] buttons allow you to scroll through the main menu selection system. Certain data entry
functions (like entering preset names) will require the [LEFT] and [RIGHT] keys to be used to change position. Certain
parameters will require [LEFT] and [RIGHT] .
To enter the main menu from preset mode, press and hold the [UP] key. To exit the main menu and return to preset
mode, press and hold the [UP] key once you are on the main menu selection screen(s). If you are inside of a menu,
press and hold the [UP] key to quickly jump to the main menu selection area, and then press and hold [UP] again to exit
the main menu system. From within a menu, you can almost always press and hold the [UP] key to have the system
jump directly to the main menu. Of course you can press the [UP] key to scroll through all the parameters until you get
to the top of the menu as well.
UP
LEFT RIGHT
DOWN
SELECT
Rotation Wheel