Fairlight CVI, User Manual

Page: 12 / 283

r
r
PUSH BUTTONS
Draw
lock:
Push to lock DRAW on, push again to unlock.
This button ena bles continuous d rawing of lines and shapes on the
screen. Use i n conjunction with the DRAW button.
See Section 3 - PAINT MENUS under PAINT METHOD.
This bu tton doubles as a
next
MEN U or PRESET selector when in
MEN U mode or PRESET select mode. You may thus step
forwards
through the PRESETS.
Stop:
Push once to stop a p rocess.
This button
stops
any special process from happening, and returns
the CVI to a neutral condition. The STOP button will haIt the
following processes:
Colour Wipes, S tencil Wipes, S e t u p selections
and some Paint Methods.
If a MENU is displayed, STOP button will return you to the
screen i mage.
Menu:
Push to enter MEN U mode.
When pushed, the last menu that was displayed will re-appear on
the screen. Press the STOP button to return to screen image.
See Section 1 - INTRODUCTION under MENUS.
The menu button also stops replaying of Sequences.
Preset:
Push to enter PRESET selection mode.
This button enables the selection of PRESETS.
To select a particular PRESET, press PRESET button, then a two
digit number (00 to 99) from the nu mber buttons. If the required
preset is numbered between 0 and 9, you may either press 0 then
the required digit, or press the digit followed by the STOP button.
To select the
next
preset, press PRESET then the 'next' button
(DRA W LOCK).
To select the
previous preset, press PRESET followed by the
'previous' button (DR A W). The 'next' and 'previous' functions
remain constant, even when MENUS are displayed.
A list of the
factory PRESETS i s a t the end of Section
2.
To
save the current control console setup a s the curre n t PRESET,
press PRESET then FREEZE. See also Section
3
under PRESETS
CONTROL menu.
I f you press the PRESET button by mista ke, press it again to
cancel it.
Freeze:
Push on, push off.
This button con trols the FREEZE f u nction in combination with
the FREEZE CONTROL men u. If the button light i s on, the live
i mage will be frozen, if off, the image will respond to the Freeze
Con trol selection.
See Section 3 - VIDEO MEN US under FREEZE CONTROL.
Press i n g PRESET then FREEZE will save the curre n t cont rol
console setup and the current menu selections a s the curr e n t
PRESET.
CVI DESCRIPTION
-
5