Fagor 8055 FL, Operating Manual

Page: 83 / 210

Operating manual
CNC 8055
CNC 8055i
WORKING
WITH OPERATIONS OR
CYCLES
3.
·TC· O
PTION
S
OFT
: V02.2
X
·83·
Simul
a
ting
an
d
executin
g the
o
peratio
n
3.2.1 Background cycle editing
It is possible to edit an operation or cycle while executing a program or part (background editing).
The new operation edited may be saved as part of a part-program other than the one being executed.
The operation being edited in background cannot be executed or simulated, and the current position
of the machine cannot be assigned to a coordinate.
Use the following keys to inspect or change a tool while editing in background.
Pressing the [T] key without quitting background editing selects the T field of the operation or of the
canned cycle being edited.
Interrupts the execution and goes on editing in background.
To quit background editing.
To access tool inspection.
ESC
Q !
T
Background editing is not possible while executing an independent operation or cycle. It can only be
done while executing a program or part.
i