Fagor 8055 FL, Operating Manual

Page: 44 / 210

·44·
Operating manual
CNC 8055
CNC 8055i
2.
O
PERATING
IN JO
G MODE
·TC· O
PTION
S
OFT
: V02.2
X
Jo
g mo
vement
2.5.4 Path-jog
The "path jog" mode acts when the switch is in one of the continuous or incremental jog positions.
This feature may be used to act upon the jog keys of an axis to move both axes of the plane at the
same time for chamfering (straight sections) and rounding (curved sections). The CNC assumes
as "Path jog" the keys associated with the X axis.
While in jog mode and having selected path-jog, the CNC shows the following information:
For a linear movement (top figure), the path angle must be defined and for an arc (bottom figure),
the center coordinates must be indicated. To define these variables, press the [F] key and then one
of these keys: [

] [

] [

] [

].
This feature must be managed from the PLC. This feature is usually activated and deactivated by
means of an external push-button or a key configured for that purpose, as well as the selection of the
type of path.
i
The next example uses the [O2] key to activate and deactivate the path-jog mode and the
[O3] key to indicate the type of movement.
Activate / deactivate the path-jog mode.
DFU B29 R561 = CPL M5054
It selects the type of movement, straight section or arc section.
DFU B31 R561 = CPL M5053
100
10
1
10 0
10
1
1000
10 000
JOG
100
10
1
100
10
1
1000
10000
JOG
15:28:42 IN POSITION
X
Z
S
00044.000
-00443.331
115
TO GO X 0000.000
TO GO Z 0000.000
F 0100.000
% 080
T 02
S 0100
% 115
SMAX 1000
RANGE 1
F 0100.000
% 080
x10


30.000
F 0100.000
% 080
x10
Xc 15.512
Zc 22.345
Xc
Zc