Fagor 8055 FL, Operating Manual

Page: 95 / 210

Operating manual
CNC 8055
CNC 8055i
WORKING
WITH OPERATIONS OR
CYCLES
3.
·TC· O
PTION
S
OFT
: V02.2
X
·95·
Facing c
ycle
3.5 Facing cycle
Facing levels 1 and 2
Level 1.
The following data must be defined:
• Coordinates of the starting point.
• Coordinates of the last point.
• The final diameter.
• The safety distance.
Level 2.
The following data must be defined:
• Coordinates of the starting point.
• Coordinates of the last point.
• The final diameter.
• The type of machining at each corner.
• The safety distance.
Facing levels 3, 4 and 5
Level 3. Rectangular pocket on the face of the part.
This key accesses the facing cycle.
This cycle may be defined in several ways:



Z
X
Xf, Zf
Xi, Zi
XC plane