■
Solvent registration screen
-30-
■
Solvent registration screen
■
Setting screen
00:00:00
■
Setting screen
※
When the vapor temperature
sensor is connected
Leak
Menu
Run
Stop
Power
DataBase
PROGRAM
Standby
00:00:00
End
hPa
Leak
Menu
Run
Stop
Power
1013
SELECT DATA 10
Acetone
2 Acetone
7 Benzene
13 Chloroform
17 1,2-Dichloroethane
21 Dichloromethane
26 Diethyl ether
Leak
Menu
Run
Stop
Power
PROGRAM
Standby
00:00:00
Esc
Leak
Menu
Run
Stop
Power
1013
hPa
Set Press
240
hPa
Slope Point 350
hPa
Slope Time 3
min
Δ P
Auto
hPa
Auto Stop
Off
Acetone
PROGRAM
Standby
00:00:00
Back
1013
hPa
Set Press
235
hPa
Slope Point 350
hPa
Slope Time 3
min
Δ P
Auto
hPa
Auto Stop Off
Acetone
End
PROGRAM
Standby
00:00:00
Back
1013
hPa
Set Press 235
hPa
Slope Point 350
hPa
Slope Time 3
min
Δ P
Auto
hPa
Auto Stop
Temp
Stop Temp
3.5
℃
Acetone
End
℃
Vapor 27.6
℃
DataBase
PROGRAM
Standby
00:00:00
End
hPa
1013
SELECT DATA 10
Acetone
2 Acetone
7 Benzene
13 Chloroform
17 1,2-Dichloroethane
21 Dichloromethane
26 Diethyl ether
Vapor 27.6
℃
(2) Changing settings
You can change each of settings for each solvent
separately according to the use conditions.
Changing of settings is made on the Setting screen.
You can move to the Setting screen by first selecting a
solvent of which you want to change the setting on the
solvent registration screen, and then pressing the dial key.
The items you can change settings are as follows:
●
Fixed pressure (Set Press)
Setting range
：
VAC
、
1
～
1013hPa(unit:1)
●
Slope start pressure (Slope Point)
Setting range
：
1
～
1013hPa(unit:1)
●
Slope time (Slope Time)
Setting range
：
1
～
999min(unit:1)
●
Hysteresis (control width) (ΔP
）
Setting range
：
Auto, 1
～
20hPa(unit:1)
Initial value
：
Auto
This shown a percentage (%) to the target slope value
during slope control and the control width during fixed-
value control.
In the Auto setting, automatic control is performed with
2% of the target pressure set as ΔP.
* No setting is necessary for the inverter pump.
●
Operation stop conditions (Auto Stop)
Setting range
：
Off, 1
～
999min(unit:1), Temp
(When the vapor temperature
sensor is connected)
Initial value
：
Off
The unit will stop automatically when the set time has
elapsed since the start of operation.
When Off is selected, operation will continue until it is
stopped with the Run/Stop key.
When Temp is selected, operation will stop based on the
margin of temperature increase (Stop Temp) from the
vapor temperature.
●
Stop temperature (Stop Temp)
This setting will be valid when you have set the
operation stop condition (Auto Stop) to Temp.
Setting range
：
0.1
～
15.0
℃
(unit:0.1)
Initial value
：
3.5
℃
When a temperature measured on the vapor temperature
sensor reaches the sum of the vapor temperature and the
stop temperature (Stop Temp) operation will stop.
* Make this setting larger if operation stops too
early and make it smaller if operation stops too
late.
* The mark will appear on items or
solvents for which settings have been changed.
(Excluding ΔP, Auto Stop, and Stop Temp)
※
When the vapor temperature
sensor is connected
