-19-
5-1-1
When the diaphragm vacuum pump is used
(1) Connect the power cord included with the model PBX
into the Power inlet with a fuse of the model PBX and
then insert it into a power outlet.
Power inlet with a
fuse
Power cord
(2) Turn the power switch of the diaphragm type vacuum
pump ON.
5-1-2
When the inverter pump is used
(1) Turn the power switch of the inverter diaphragm
type vacuum pump ON.
5-1-3 When connected to a condensation related unit
with a communication cable
(1) Turn power of the condensation related unit ON.
Solenoid valve for NVC control
Do not attempt to touch the surface of the solenoid
valve for NVC control during operation.
Care for burning.
Caution
* The surface of the solenoid valve for NVC control
may become hot during operation.
Pump
connecting
cord
5-1
Preparing for operation
5 Operation
Using any other cord might cause a fire.
Be sure to use the power cord
included with the product.
Warning
Using the power cord or the power plug with under
load or sharply kinked may cause disconnection and
make the unit inoperable.
Avoid subjecting the power cord to
load.
Caution
Do not connect any device other than
the specified vacuum unit.
Warning
Operating the product with a device other than the
specified vacuum unit may prevent its proper
operation as well as lead to a malfunction or an
accident.