Serial Communication, cont’d
MLC 52 Series MediaLink Controller • Serial Communication
5-14
“Build MediaLink Configuration from...” window, drivers folder
c
.
From the list on the “Build MediaLink Configuration from...” screen,
select the driver for your projector, then click Open.
d
.
Another confirmation prompt appears, reminding you that any
previous settings will be overwritten by the new driver you are loading,
and asking if you want to continue. Click Yes.
The small Downloading Page
n
to MediaLink window displays the
incrementing percentage of the driver package that has been loaded.
When the driver is completely loaded, the window disappears (this
takes approximately 30 seconds).
If you have used the MLC 52 configuration program previously to
configure the MLC 52
, and you want to save your current configuration
before loading a new driver to replace the existing one, follow these steps:
a
.
Click Yes on the confirmation prompt window. The “Save Current
MediaLink Configuration as...” window opens.
b
.
If necessary, browse to locate the folder in which you want to save your
configuration. (By default, the MediaLink folder opens.)
c
.
Click Save. The current configuration is saved as a file with a .mlk
extension, and the “Build MediaLink Configuration from...” window
opens (this takes approximately 30 seconds).
d
.
Follow steps
b
through
d
in the “
First time
” procedure, above, to load
the desired driver.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203