5-13
MLC 52 Series MediaLink Controller • Serial Communication
Assigning functions to buttons using RS-232 drivers
To assign button functions using RS-232 drivers,
you must first load the drivers
to the MLC 52
from the MediaLink file on your PC hard drive.
Loading Extron drivers for RS-232 communication
To load an Extron driver, follow these steps:
1
.
From the File menu on the MLC 52 Configuration program screen, select
Load New EXTRON DRIVER from... .
File menu
2
.
The following confirmation prompt window appears.
MediaLink Control confirmation prompt for loading a driver
On this window, do one of the following:
If this is the first time you will be configuring the MLC 52 with the
configuration software,
follow these steps to load a driver:
a
.
Click No. (There is no configuration to save.) The “Build MediaLink
Configuration from...” window opens.
b
.
Open the drivers folder by clicking on its file name, then clicking Open.
(You can also open the folder by double-clicking on its file name.)
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203