Special Applications, cont’d
MLC 52 Series MediaLink Controller • Special Applications
4-14
4
.
When finished programming the MLC 52 buttons, return configuration
switch #1 to its
off
(down) position. Test the system.
MLC 52
DISPLAY
ON
PC
VIDEO
OFF
VOL
VOL
Command #1 / RGB / IR Command “A”
Command #2 / RGB / IR Command “B”
Command #1 / Video / IR Command “A”
Command #2 / Video / IR Command “B”
SIZE
ENTER
MENU
CENTER
CONT/
BRT
COL/
TINT
ASPECT
RATIO
VIDEO
MUTE
AUDIO
MUTE
A/V
MUTE
SHARP
PHASE
VIDEO
COMPUTER
Projector Remote Type B
Programming MLC 52 input selection buttons from projector remote
type B
Issuing input selection commands learned from remote control type B
The MLC now has
two
commands each on the PC and VIDEO buttons. When you
press an MLC input button repeatedly, the following commands are issued.
Using the PC button (RGB):
•
First press (memory block #1):
The MLC 52 issues command “A” for RGB
input selection.
•
Second press (memory block #2):
The MLC 52 issues command “B” for
RGB input selection.
Using the VIDEO button (S-video or composite video):
•
First press
(
memory block #1
): The MLC 52 issues command “A” for
composite video input selection.
•
Second press
(
memory block #2
): The MLC 52 issues command “B” for
S-video input selection.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203