Exhausto EXcon, Original Instructions Manual

Page: 42 / 52

4.1.6 Damper
Service menu
Damper Description
DAMPER
Show current operating status. Set functions and forced
fan control of damper.
Submenu Any comments
Outdoor air damper
Outdoor air damper, status
● Current damper position: Open/closed
● Current supply air [m3/h] [l/s]
Shown at Belimo Mod-
bus damper motor Damper motor, Modbus
● Current damper setting [%]
● Absolute position [Feedback]
● Test run: Yes/No
● Communication [Active] / [Inactive]
Shown only in case of
modulating damper
motor Set outdoor air damper
● Current damper setting [%]
● Set correction factor
● Set offset [V]
● Current supply air [m3/h] [l/s]
Shown only in case of
modulating damper
motor Override outdoor air damper
Overriding is only possible once the unit has started.
● Set remaining time until overriding terminates
[hh:mm:ss]
● Activate override: On/ Off
● Set override operation setpoint [V]
● Current supply air [m3/h] [l/s]
Extract air/Exhaust air damper
Extract air damper, status
● Current damper position: Open/closed
● Current extract air [m3/h] [l/s]
Shown at Belimo Mod-
bus damper motor Damper motor, Modbus
● Current damper setting [%]
● Absolute position [Feedback]
● Test run: Yes/No
● Communication [Active] / [Inactive]
Shown at Belimo Mod-
bus damper motor
Shown only if modula-
ted recirculation is con-
figured
Damper motor, Modbus
● Current damper setting [%]
● Absolute position [Feedback]
● Test run: Yes/No
● Communication [Active] / [Inactive]
3005858-2017-09-28
Service level
42/52