Exhausto EXcon, Original Instructions Manual

Page: 12 / 52

3.1.1 Fan operation
Installer menu
Fan operation Description
FAN OPERATION
Selection of fan regulation type, setpoints and automat-
ic functions.
Submenu Any comments
Shows current operating values
● Outdoor air [m
3
/h] / [l/s]
● Exhaust air [m
3
/h] / [l/s]
● Extract air [m
3
/h] / [l/s] [Pa] [ppm CO
2
] [%]
● Supply air [m
3
/h] / [l/s] [Pa] [%]
Adjust setpoint - Low speed
● Extract air [m
3
/h] / [l/s] [Pa] [ppm CO
2
] [%]
● Supply air [m
3
/h] / [l/s] [Pa] [%]
Adjust setpoint - High speed
● Extract air [m
3
/h] / [l/s] [Pa] [ppm CO
2
] [%]
● Supply air [m
3
/h] / [l/s] [Pa] [%]
Shown for regulation
modes:
● Constant pressure
● Extract air slave
● Supply air slave
Set air quantity
● Max extract air [m
3
/h] [l/s]*
● Max supply air [m
3
/h] [l/s]**
* Not shown for extract air slave
** Not shown for supply air slave
Shown for regulation
modes:
● Constant
VOC/CO
2
Set min/max airflow
● Min airflow [m
3
/h]
● Max airflow [m
3
/h]
Shown for regulation
modes:
● Fan optimiser
slave
Offset
● Offset extract air [%]
Shown only if cooling is
installed Set cooler speed
● Forced cooling: On/ Off
● % increase of fan speed when cooling is active.
3005858-2017-09-28
Installer level
12/52