Service menu
Cooling
Description
Shows current status of cooling compressors
● Current cooling errors compressor 1: Yes/No
● Current cooling errors compressor 2: Yes/No
● Current cooling errors compressor 3: Yes/No
● Current cooling errors compressor 4: Yes/No
Settings for connection times on cooling relays
● Set min. cooling time [sec]
● Current cooling time relay 1 [sec]
● Current cooling time relay 2 [sec]
● Current cooling time relay 3 [sec]
● Current cooling time relay 4 [sec]
Settings for restart times on cooling relays
● Set max number restarts per hour
● Current number restarts relay 1
● Current number restarts relay 2
● Current number restarts relay 3
● Current number restarts relay 4
Settings for stop times on cooling relays
● Set min stop time [sec]
● Current stop time relay 1 [sec]
● Current stop time relay 2 [sec]
● Current stop time relay 3 [sec]
● Current stop time relay 4 [sec]
Settings for blocking on cooling relays
● Compressor relay 1 blocked: Yes/No
● Compressor relay 2 blocked: Yes/No
● Compressor relay 3 blocked: Yes/No
● Compressor relay 4 blocked: Yes/No
Water cooling
Shows current status of cooling
● Current outdoor temperature [°C]
● Current cooling [%]
● Current supply air temperature [°C]
Shown at Belimo Mod-
bus valve
Cooling interface, Modbus
● Current valve setting [%]
● Absolute position [Feedback]
● Test run: Yes/No
● Communication: Active / Inactive
Forced control of cooling coil
Forced operation is only possible once the unit has
started.
● Set forced operation setpoint [%]
● Current supply air temperature [°C]
● Set remaining time until forced operation termi-
nates [hh:mm:ss]
● Activate forced operation: On/ Off
● Current status Cooling relay 1: Open/closed
● Set motor valve's regulation area [2-10V =
VEX4000 standard]
3005858-2017-09-28
Service level
39/52
Summary of Contents for EXcon
Page 52: ......
