46
WT.050.810.040.DE.IM.0519
Installation
DEPOLOX
®
5 E flow cell
4.
5
Insert or screw the prepared sensors into the corresponding mount
-
ing hole in the cell body cover.
A 3-electrode measuring cell (already installed)
B Membrane sensor for total chlorine TC3 CAN
C Conductivity sensor
D Redox combined measuring and reference electrode
E LED glow stick
F pH combined measuring and reference electrode
4.4.15
Installing calibration aids
Two calibration clips are installed in the housing cover. These are
inserted on the side at the back of the main housing.
The clips with plastic inserts for sensor is pushed into the upper
catch (A).
The second holding bracket holds the calibration solution in a bag or cup.
For the solution in the bag, position the holding bracket in the upper posi
-
tion of the lower holding device (B). For the cup, use the lower position
(C).
Image 17Rear of DEPOLOX
®
5 E flow cell, pressurized
A Upper holding device
B Position of holding device for bag
C Position of holding device for cup
Image 14Non-pressurized
version
Image 15Pressurized version Image 16Pressurized version
with cell body cover
W3T417351(option
-
al)
A
B
D
E
F
C
A C
F E D
A
B
D
E
F
C
A
B
C
Summary of Contents for WALLACE & TIERNAN DEPOLOX 5 E 700 P Series
