10
WT.050.810.040.DE.IM.0519
Safety
DEPOLOX
®
5 E flow cell
2.
2.4
Warranty conditions
The following must be observed for compliance with warranty conditions:
• Installation and commissioning by the manufacturer or trained and
authorized specialists, e.g. of contractors
• Intended use
• Observation of the operational parameters and settings.
• The unit may only be operated by trained personnel.
• An operating log book must be kept (only in the public sector).
• Only approved calibration chemicals may be used
• The unit must not be exposed to frost.
• Maintenance work must be executed
• Use of genuine spare parts
If any of the above conditions are not met, the warranty is void.
2.5
Disclaimer
We are not liable for any damages incurred during installation or use of
these hardware and software components. This applies specifically to
trouble-free interaction with the software and hardware components you
choose.
We are not liable for buyer damages (in particular, lost profits, lost infor
-
mation and service interruptions), which arise when using the
DEPOLOX
®
5 E flow cell, nor for other damages. You are solely respon
-
sible for the installation!
The contents of the instruction manual has been checked to make sure
that it matches the detailed hardware and software. Deviations can nev
-
ertheless not be ruled out and we therefore assume no liability for full
conformity. The details in this instruction manual are checked regularly
and any necessary corrections are included in subsequent issues.
Summary of Contents for WALLACE & TIERNAN DEPOLOX 5 E 700 P Series
