DEPOLOX
®
5 E flow cell
Retrofit kits, spares and accessories
6.
61
16
The membrane sensor is connected either at the CAN socket (O -
Figure 5) on conductivity module SiDiSens connected directly via the
CAN extension socket (L - Figure 4) on DFMe electronics module.
17
Refit and engage the housing cover of the DEPOLOX
®
5 E flow cell.
Image 5 Conductivity module SiDiSens
O CAN socket for connecting the membrane sensor
Overview of CAN connec
-
tion
The image below shows the CAN connection.
Image 6 Cross-section DEPOLOX
®
5 E flow cell with 700 P electronics
module
A CAN connection at SiDiSens LF module for connection of
Membrane sensor or terminating resistor M12 of the module
SiDiSens LF
B Securing screw, DFMe electronics module
C CAN socket for connection of CAN connection cable of
the DEPOLOX
®
5 E flow cell or DFMe electronics module
D CAN connection cable
E CAN extension socket
F CAN connection cable for SiDiSens conductivity module or membrane
sensor
O
C
F
E
D
A
B
C
Summary of Contents for WALLACE & TIERNAN DEPOLOX 5 E 700 P Series
