EverFocus Flex1.0, User Manual, Page: 56 / 123

Chapter
7
Door Access Setting
The EverAccess Flex Series controller provides flexible control of each door in the
system. Each door can be assigned on of three access verification levels: always
unlocked, only a card required to access, of card plus PIN required to access. This
chapter introduces the door access settings. This chapter will explain:
•
The concept of door access settings
•
How to configure the door access settings
Introduction to Door Access Settings
To make the access control more flexible and convenient for system managers,
EverAccess Flex controller and software also provide simple solutions to set up the
door access setting.
Door access setting
indicates the total access control at a door,
encompassing the whole set of specified verification level, time zones and date type.
The system supports 3 different
verification levels
for the door access:
•
Unlocked (Door remains unlocked)
•
Card or PIN (Presenting a card OR entering a PIN number)
•
Card (Presenting a card only)
•
Card plus PIN (Presenting a card AND entering a PIN number).
Similar to the access group setting, users can assign a door access rule for each door to a
time zone. Up to 10 time zones can be assigned on a certain date type. In other words,
users can define any door control rules as above on 10 different durations on each date
type.
Door Access Setting Dialog
In the main menu of the controller’s software, choose Management->Access group
setting, as shown in Fig. 5.1. Then click the tab of “Door Access Setting”, as shown in
Fig 7.1. The tab consists of the components listed below:
49