EverFocus Flex1.0 User Manual Download Page 32 | Manualshive

Page: 32 / 123

background image

All events that might trigger an alarm are listed and explained below. These events are
located under the “Alarm setting 1”, “Alarm setting 2” and “Alarm setting 3” tabs in the
Controller Configuration window. How to set a particular alarm is explained in the next
section, entitled “Configure a General Alarm”.

Alarm Setting 1 Tab:

Fig. 4.16 Alarm setting 1 tab

Note: The content in Alarm setting tab will be only shown when the alarm module is
installed in the controller.

Alarm setting 1 tab shows the relationship between all the alarm outputs and the alarm
inputs from Zone Alarm 1~8:

The zone alarm reacts to 8 alarm inputs on the alarm module. The alarms are triggered
according to the settings for each different Arm zone setting in the “ArmZone 1~8”
columns.

Alarm Setting 2 Tab:

Alarm setting 2 tab shows the relationship between all the alarm outputs and the alarm
inputs coming from the main module of EverAccess Flex controller, such as fire alarm
and etc. All the alarm inputs are explained as below:

•

Fire Alarm:

When a fire alarm input occurs, the controller generates a fire alarm output(s)
according to the settings in the “Fire Alarm” column.

•

System PIN Fail:

25

«
...
30
31
32
33
34
...
»

Summary of Contents for Flex1.0




























































































































Reviews:

No comments

Related manuals for Flex1.0

Brand: Yamaha Pages: 37

Brand: ITech Pages: 22

Brand: Sigma Pages: 55

IronKey Workspace Provisioning Tool 1.0

Brand: Imation Pages: 19

Brand: Nokia Pages: 29

Brand: Nokia Pages: 29

Brand: Nokia Pages: 35

NPS6113000 - Secure Access System

Brand: Nokia Pages: 48

N73 - Smartphone 42 MB

Brand: Nokia Pages: 354

N73 - Smartphone 42 MB

Brand: Nokia Pages: 265

Network Voyager

Brand: Nokia Pages: 700

Brand: Internet Security Systems Pages: 126

Brand: M-Audio Pages: 15

Brand: Navman Pages: 52

NORTON INTERNET SECURITY - FOR MAC V4

Brand: Symantec Pages: 28

CONFLICTMANAGER

Brand: Symantec Pages: 54

Brand: Fiery Pages: 214

Brand: LEI accessories Pages: 116

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands