EverFocus Flex1.0, User Manual

Page: 55 / 123

Download the setting data to controllers
Once finished configuring the access authority setting for the access groups, click the
close button shown as 8 in Fig. 6.1. The dialogue box of “Download Data to
Controller” will pop up, as shown in Fig. 6.4.
Figure 6.4 The dialogue box for “Download Data To Controller”
Follow the steps below to download the updated control data to the controllers.
1. Choose the controllers that need to be updated. Click on the controllers whose
settings have been modified, from the “controller list”. The chosen one is
highlighted.
2. Adding to the “target controller”. Click the “Add” button. The controller is
then shown in the list of “target controller”. Repeat steps 1 and 2 until all the
controllers that need to be updated are shown in the “target controller” list. Or
the user can easily add all the online controllers to the “target list” by clicking
the “All” button.
3. Select the databases. The boxes of databases needed for the door zone setting
update are automatically checked already,
i.e. control group setting and day I/O
setting. If any other databases require update, please check the corresponding
boxes. For details, please refer to the chapter of “Data Communication with
Controllers”.
4. Download data to controller. By clicking the button of “Download Now”
, a progress bar of data transmission appears on the screen.
After the complement of the data transmission, a popup dialogue box,
indicating the finish of the transmission, is shown on the screen. Close it and
the dialogue of “Download Data to Controller”
5. Return to the main menu of system. Having finished the group setting and data
download, the system will return to the main menu of monitoring.
48