PCN-1001 general description
PCN-1001 User manual
18
PCN-1001_UserMan_En_4.0
Front interfaces. The service panel
A Service panel, located on the front of the PCN-1001, gives access to some interfaces used for configuration,
maintenance, and development of applications.
NOTE:
The service panel is held in place by 2 Torx M3 * 6 screws, these should be removed using a Torx T9
screwdriver.
WARNING!
The PCN-1001 should not be used for extended periods of time with the service plate removed.
Doing so will cause dust and other particulates to enter the system, causing degradation to the
optics. If it is necessary to have extended access to the Mini-USB connector, take appropriate
precautions to stop any particulates from entering.
LED indicator assignment
LED COLOUR
MEANING
LED STATUS
Green
Power status
ON:
PCN-1001 turned ON
OFF:
PCN-1001 turned OFF
Amber
System status
Blinking: Boot in progress
ON:
Boot finished and PCN-1001 ready to operate
Notes about the Mini USB port
This is a standard Mini-USB type “B” 1.1 client port and is used to connect the PCN-1001 to a Host PC for
maintenance and configuration.
For further information refer to the paragraph ‘
Step 3.2: Connect the PCN-1001 with the Host PC
Reserved Port
Reset Pushbutton
Reserved Jumper
(Leave open)
Amber LED
System status
Green LED
Power Status
Mini USB 1.1
Client Connector
THE SERVICE PANEL
Summary of Contents for PCN-1001
