Eurotech PCN-1001, User Manual

Page: 54 / 118

Install/update the software PCN-1001 User manual
54
PCN-1001_UserMan_En_4.0
Updating Imgserver on the PCN-1001
The PCN-1001 comes with Imgserver already installed and ready to work.
When available, new versions of the Imgserver can be installed in the following way:
1. The PCN-1001 has to be turned on and connected to the Host PC via USB. Refer to “ Install a PCN-1001 ” 33
and “ Step 3: Configure the network between PCN-1001 and Host PC ” on page 36 for further information
2. Start WinClient
3. Select the "Connection" tab ( A ) and click the “Scan” button ( B ).
Select the address of the required PCN-1001( C ). Click the “Connect” button ( D ).
When connected, the Imgserver version will be displayed on the bottom line (the Status bar; E )
4. Select the "Controls" tab ( F ) and click the "System Update" button ( G )
A
B
C
D
E
G
F
E