Eurotech PCN-1001, User Manual

Page: 86 / 118

Test an RS485 connection and use the RS485_GUI PCN-1001 User manual
86
PCN-1001_UserMan_En_4.0
The file transfer progressing is displayed in the log view as shown as follows:
No other operation is allowed during file transfer.
When transfer finishes a proper message will be shown in the log view and the user will be allowed to perform
other operations.
The “Stop” button stops the transfer and interrupts the update.
Notice that even if during the file transfer some packets are lost the protocol guarantees a successful
transmission by sending again the lost packets. If more than 10 consecutive packets are lost the application will
stop the file transfer and an error message will be displayed in the log view.
“Optocoupled Inputs functions” panel
See the section ‘ The I/O settings tab – Optocoupled I/O’ on page 67.
“Optocoupled outputs open time” panel
See the section ‘ The I/O settings tab – Optocoupled I/O’ on page 67.
Light intensity
This allows you to set the LED intensity . See the section ‘ The “Light intensity” panel ’ on page 61.
“Log” panel
The “Save records” button allows you to download the log file as a text. This option works as ‘ Save the records of
the log file’ on page 65.
The “Stop” button allows you to stop and cancel the saving process.